ELEGOO PLA+ Filament 1kg (orange)
-
Watch the product:
- Add feedback:
- Code: INN_54145
- Manufacturer: ELEGOO
- Availability: 1 working day
-
- 17.25 EUR
- szt.
BUY NOW AND CREATE YOUR DREAM HOME. DO IT NOW IN 3 SIMPLE STEPS.
Your purchases will be delivered by DPD Courier.
You can pay for your purchases with credit card or bank transfer using safe PayU system or bank transfer.
You've made a good choice. However, if you return the product within 14 days, you'll receive a full refund.
ELEGOO PLA+ Filament (orange)
ELEGOO filament in orange is a great option for those looking for intense, well-saturated colors. The material has a smooth surface and provides high-detail prints, making it suitable for both prototypes and decorations. It's based on PLA+ (polylactide plus – a biodegradable, plant-based material enriched with additives for increased durability). Each spool contains 1 kg of filament.
Durability and precision
Thanks to its increased resistance to cracking and improved layer cohesion, PLA+ is stronger than standard PLA, yet just as easy to print. A consistent 1.75mm diameter and dimensional precision of ±0.02mm ensure smooth material feeding and reduced risk of blockages. Its smooth surface and good thermal conductivity ensure that even the most complex models emerge cleanly and without warping.
Convenience and Compatibility
The material is evenly wound and hand-checked, reducing the risk of tangling. The entire unit is vacuum-sealed with a moisture absorber, so you can start printing immediately after opening. The product is compatible with most FDM (Fused Deposition Modeling – a 3D printing technology where material is melted and deposited in layers) printers that support 1.75mm filament.
General
| Producent | ELEGOO |
|---|---|
| Model | 50.203.0073 |
| Kolor | Pomarańczowy |
| Waga | 1 kg |
Zalecane ustawienia druku
| Drying Settings Before Printing | 55 ± 5°C |
|---|---|
| Ambient Temperature and Humidity | ≤ 50°C, ≤ 20% RH (store with a desiccant) |
| Nozzle Temperature | 200 – 230°C |
| Bed Temperature (depending on the printer and surface) | 35 – 65°C |
| Build Surface Type | Textured PEI board (polyetherimide – a durable material that holds prints well) or other compatible boards |
| Printing Speed | Less than 280 mm/s |
Physical Properties
| Density | 1.30 g/cm³ |
|---|---|
| Melting point | 161°C |
| Heat deflection temperature | 56°C |
| Softening point (Vicat test) | 63°C |
Mechanical properties
| Tensile strength (XY – measured in the horizontal print plane, where the material is strongest) | 38 ± 2 MPa |
|---|---|
| Elongation at break (XY) | 7.9% ± 1.6% |
| Flexural strength (XY) | 74 ± 4 MPa |
| Flexural modulus (XY) | 2979 ± 156 MPa |
| Impact strength (XY) | 65.5 ± 3.6 kJ/m² |
Ask a question about the product. Our team will be happy to provide a detailed answer to your inquiry.
Polish