Filament ELEGOO PLA Marble
-
Watch the product:
- Add feedback:
- Code: INN_54142
- Manufacturer: ELEGOO
- Availability: 1 working day
-
- 19.75 EUR
- szt.
BUY NOW AND CREATE YOUR DREAM HOME. DO IT NOW IN 3 SIMPLE STEPS.
Your purchases will be delivered by DPD Courier.
You can pay for your purchases with credit card or bank transfer using safe PayU system or bank transfer.
You've made a good choice. However, if you return the product within 14 days, you'll receive a full refund.
Filament PLA Marble ELEGOO
ELEGOO's marble-colored filament allows you to create unique models with a realistic, stone-like finish. Thanks to additives that give the surface a distinctive marble effect, prints achieve an aesthetic ideal for decorations, figurines, or architectural models. The material is PLA-based (polylactide – a biodegradable, plant-based plastic), making it environmentally friendly. Each spool contains 1 kg of filament, which is enough for many medium- to large-sized prints.
Stable and clean printing
The product has a diameter of 1.75 mm and a very precise dimensional tolerance (±0.02 mm), ensuring consistent, jam-free feeding into the printer. It adheres well to the print bed and does not create bubbles or excessive stringing, minimizing material waste and saving time. The result is smooth, durable models with a uniform appearance.
Practical and eco-friendly spools
The filament spools are made of cardboard, which facilitates recycling and reduces the product's environmental impact. Additionally, each spool is precisely machine-wound and hand-checked to prevent tangling. Three holes in the spool allow you to easily see how much material is left.
Ogólne
| Producent | ELEGOO |
|---|---|
| Model | 50.203.0113 |
| Kolor | Marmurowy |
| Waga | 1 kg |
Zalecane ustawienia druku
| Drying Settings Before Printing | 55 ± 5°C |
|---|---|
| Ambient Temperature and Humidity | ≤ 50°C, ≤ 20% RH (store with a desiccant) |
| Nozzle Temperature | 190 – 230°C |
| Bed Temperature (depending on the printer and surface) | 35 – 65°C |
| Build Surface Type | Textured PEI board (polyetherimide – a durable, well-adhering material used as a base for 3D prints) or other compatible surface |
| Print Speed | Below 300 mm/sec |
Physical Properties
| Density | 1.26 g/cm³ |
|---|---|
| Melting point | 158°C |
| Heat deflection temperature | 57°C |
| Softening point (Vicat test) | 62°C |
Mechanical properties
| Tensile strength (XY - measurement taken in the horizontal print plane, where the material is strongest) | 38 ± 3 MPa |
|---|---|
| Elongation at break (XY) | 10.5% ± 2.1% |
| Flexural strength (XY) | 72 ± 5 MPa |
| Flexural modulus (XY) | 2993 ± 182 MPa |
| Impact strength (XY) | 66.2 ± 3.9 kJ/m² |
Ask a question about the product. Our team will be happy to provide a detailed answer to your inquiry.
Polish